- Bus Body Kits[1]
- Bus Accessories[6]
- Harvesters[5]
- Farm Machinery Parts[10]
- Motor Graders[1]
- Road Roller[6]
- Diesel Generators[7]
- Grass Trimmer[5]
- Sprayers[2]
- Cargo Truck[6]
- Dump Truck[1]
- HVAC Systems & Parts[6]
- Electric Heaters[1]
- Steel Round Bars[3]
- Steel Sheets[4]
- Hoists[7]
- Laser Equipment[6]
- Printing Machinery[1]
- Mining Machinery Parts[3]
- Tool Parts[2]
- Chisel[2]
- Angular Contact Ball Bearings[2]
- Pillow Block Bearings[1]
- Taper Roller Bearings[2]
- Deep Groove Ball Bearings[1]
- Thrust Ball Bearings[1]
- Excavators[7]
- Control Cables[1]
- Electrical Wires[1]
- Power Cables[4]
- Aluminum Wire[1]
- Tractors[4]
- Coach[1]
- Packaging Machinery[6]
- Contact Person : Mr. YANG LOUIS
- Company Name : Liaocheng Huida Import & Export Co., Ltd.
- Tel : 86-635-8935016
- Fax : 86-635-8935018
- Address : Shandong,Liaocheng,9-3141,Arcadia,No.27,Jianshe east Road,Liaocheng,Shandong,China
- Country/Region : China
- Zip : 252000
power cable
POWER CABLEPVC INSULATED AND SHEATHED POWER CABLEGB/T12706-2002USAGEPVC INSULATED AND SHEATHED POWER CABLE IS USED AS POWER DISTIBUTION AND TRANSMISSION LINE AT RATED VOLTAGE 0.6/1 KV AND FREQUENCY 50 HZ WHICH CAN BE FIXED INSTALLED. USING PROPERTY1.THE LONG-TIME WORKING TEMPERATURE OF CABLE SHOULD NOT BE HIGHER THAN 70.
2.WHEN CORE IS IN SHORT-CIRCUIT(MAX 5S)THE TEMPERATURE SHOULD NOT EXCEED 160 .
3.WHILE INSTALLATION THE AMBIENT TEMPERATURE SHOULD NOT BE LOWER THAN 0,AND THE BENDING RADIUS SHOULD NOT BE LESS THAN 10 TIMES OF OUTER DIAMETER OF CABLE. MODEL: VVCOPPER CORE PVC INSULATED AND PVC SHEATHED POWER CABLE
VLVALUMINIUM CORE PVC INSULATED AND PVC SHEATHED POWER CABLE
VV22COPPER CORE PVC INSULATED FINE STEEL WIRE ARMOURED PVC SHEATHEDED POWER CABLE
VLV22ALUMINIUM CORE PVC INSULATED FINE STEEL WIRE ARMOURED PVC SHEATHEDED POWER CABLE CROSS-LINKED POLYETHYLENE INSULATED POWER CABLE(GB/T12706-2002) USAGE: THE CABLE IS USED IN ELECTRIC TRANSMISSION AND DISTRIBUTION SYSTEM OPERATING AT RATED VOLTAGE 0.6/1,1.8/3,3.6/6,6/10,8.7/10,8.7/15,12/20,21/35,26/35Kv.
USING PROPERTY 1.NEEDNT WARM-UP WHILE INSTALLATION THE AMBIENT TEMPERATURE ABOVE 0.
2.THE LONG-TIME WORKING TEMPERATURE OF CABLE SHOULD NOT BE HIGHER THAN: 90 WHEN THE OUTER SHEATH IS PVC, 80 WHEN THE OUTER SHEATH IS POLYETHYLENE.
3.WHEN CORE IS IN SHORT-CIRCUIT(MAX 5S)THE TEMPERATURE SHOULD NOT EXCEED 250 . WHILE INSTALLATION THE BENDING RADIUS SHOULD NOT BE LESS THAN: 20d+D)±5% WHEN SINGLE CORE CABLE, 15d+D)±5% WHEN TRI-CORE CABLE.D-OUTER DIAMETER OF CABLE, d-OUTER DIAMETER OF CONDUCTOR
power cable
